Cedar hall table

Just a few WIP pics of an Australian Cedar hall table that I'm putting back together.
This is another piece that I'll sell on as there is no room in the house.
No real before shots because it was dragged from the farm shed in a pile of bits.

Most of the time spent was removing the coat of paint.

Cleaning and polishing the legs in the lathe.

Attachment 492495 Attachment 492496 Attachment 492497

I replaced both of the sides as one had a tenon cut off, and the other was smashed (see pic). Hard to add floating tenons when the tenon is lined up with the face of the board.

Attachment 492498 Attachment 492499

The front apron was interesting. Very ratty at the back and tapered along its length.
One good face was all that was required.

Attachment 492500 Attachment 492501

The back rail is Baltic Pine.
Frame parts and the glue up.

Attachment 492502 Attachment 492503

The top was stripped, cleaned and jointed.

Attachment 492504 Attachment 492505

The table is all together now and getting a good coat of polish.

I'll post an after pic when it's done.