Sanding down benchtop and recoating

Printable View

26th January 2021, 03:58 PM
copperwood

Sanding down benchtop and recoating

I've got a wooden kitchen benchtop - not sure what kind of wood.

I believ the existing coating is some sort of polyurathane, see pictures after some scraping.

I've now scrapped some areas off and sanded with and orbital sander at 120grit, then hand sanded to 240grit and test applied some hard wax oil - didn't like the effect, not as thick as the existing coating.

Does anybody have any recommendations of a poly product to use that is thick like the existing, it's very thick as you can see from the shavings.
Imgur: The magic of the Internet
26th January 2021, 05:00 PM
China

I would use Rustins Plastic coating, in my opinion and many others it is the best product every produced for Bench tops.

All times are GMT +11. The time now is 03:02 PM.

This website and its content is copyright of U-Beaut Enterprises.
Any redistribution or reproduction of part or all of the contents in any form is prohibited other than the following:

♦ you may print or download to a local hard disk extracts for your personal and non-commercial use only
♦ you may copy the content to individual third parties for their personal use, but only if you acknowledge
Woodwork Forums as the source of the material.

You may not, except with our express written permission, distribute or commercially exploit the content.
Nor may you transmit it or store it in any other website or other form of electronic retrieval system.