Advice on which filler is best to use with danish oil

Printable View

9th February 2020, 04:28 PM
donrigg

Advice on which filler is best to use with danish oil

Hi,

I have a piece of light colored solid hardwood that i want to used as a bar table top, but has quite a bit of weathered cracks that I want to fill prior to using danish oil.
Some of the weathered cracks are up to 1.5 mm or 1/16 inch wide.
What would be the best type of filler to use?

Another thought, what do you think of if I used the fine wood dust from the hardwood after sanding, and then mixing it with a bit of danish oil to be then pushed into the cracks.
Do you think that would work?

All times are GMT +11. The time now is 10:34 AM.

This website and its content is copyright of U-Beaut Enterprises.
Any redistribution or reproduction of part or all of the contents in any form is prohibited other than the following:

♦ you may print or download to a local hard disk extracts for your personal and non-commercial use only
♦ you may copy the content to individual third parties for their personal use, but only if you acknowledge
Woodwork Forums as the source of the material.

You may not, except with our express written permission, distribute or commercially exploit the content.
Nor may you transmit it or store it in any other website or other form of electronic retrieval system.