Problem with a Jacaranda bowl.

I have a jacaranda bowl that I tried to coat, unsuccessfully, with CA. I sanded all of this off and
tried to re-coat with Liberon finishing oil. So far two coats.The inside is OK but the outside is patchy,
and I am running out of oil. Should I persist with further coats? Or will Feast and Watson Scandanavian
oil go over the top of the Liberon?

If the Scandanavian does not work, what is the best method to remove Liberon?
It has been suggested that I use EEE after an initial sanding with 320 or 360.

All help appreciated. Thanx, artme.