Printable View
Hey guys, so all my skirting and arcs (primed mdf with two coats of paint already ) have been shot to the wall. Wondering if i just use a multi purpose filler to fill the nail holes and then sand back it'll be all good for painting? After caulking as well of course.
Anything else I should know?
Cheers
Read and reply to the full thread at RenovateForum.com....
Sounds like a good plan to me. The only other thing I'd check is if it's oil or water based paint on there already as water based doesn't apply well to oil based.
Some of those fillers dry to a VERY hard material which is very hard to sand back flush with the surface. I like to use a damp rag to "flatten" the filler after the hole is filled then when dry run around with sand paper and block to be sure the surface is flat.
If you are up to the skirts and arcs and paint the job is nearly finished
Did no one read this part of the original post? :?
This post is for info, the original poster would never see your sage advice as he/she may not be a member here. :doh:Quote:
Read and reply to the full thread at RenovateForum.com....