Printable View
G'day all
new here just looking for some advice
Have a piece of wood straight slab cut from tree that's looks like a barramundi fish
Size is 2.4 meters long 60 cm high
And 4 cm thick
thinking of drilling 2 holes and hang with chain any other ideas
Will try to post photo have to how I can do that
Thanks
Mick
G'Day & Welcome to a top forum "Mick".
There are a stack of members in Brisbane & S.E. Queensland plus the rest of the world.....
You'll find a heap of helpful & knowledgeable blokes & ladies on the forum and for most very willing to assist.
Make sure you show off your handiwork as everyone loves a photo, especially WIP [Work In Progress] photos with build notes.
You certainly have one beautiful piece of timber there.
May I suggest that you add a new thread in the general section of the forum to gain a wider audience and thus more replies to your question.
Enjoy the forum.
Enjoy your woodwork......
Cheers crowie
Thanks still finding my way around
Not sure what you mean buy general forum thought that's were I posted
Welcome to the forum.
What Crowie was referring to was this part of the forum.
https://www.woodworkforums.com/f11
Or you can navigate by scrolling down from the front page or another option would be via the down arrows when you click on Forum.
Hey - I would look at a 4 point harness instead of drilling into it.
i.e. hooks on 4 corners going back to a central (but offset vertically higher) chain on the back. This will save you from drilling into the piece, and of the 4 hooks I would make 3 smaller, maybe with a black cover to conceal, then the bottom right one make bigger and have exposed to make it look like a fish hook and that you "caught" it.
Welcome to the forum Mick.
How does the back look?
If you have a high enough ceiling With a piece like that I'd consider hanging it i the middle of a space and suspending it from ion from the top edge.
Welcome to the forum