Bifold doors help

Hi everyone

We are having a bit of a mare. We are currently doing some renovations. We scored some amazing Jarah bifold doors, we have had them in the garage for nearly 4 months now. I started the prep work like sanding and painting when I noticed we are missing a access panel section piece of the top track.

The missing piece is approx 550mm in length. The missing track is made of aluminum, its the top track which guides the doors.
We have looked everywhere but no luck!!! So we are now looking for this missing piece or at least get one made the does the job.

So far we have connected a few door companies and because we did not buy the doors from them we are getting nowhere.
We know the doors are approx 10+ years old so the hardware nowadays is different. I have tried Brio and got nowhere. Waiting to hear back from Centor, but not holding our breath!

Does anyone have any suggestions or ideas on how to resolve this mess. The door are solid jarah and the hinges and hardware are all rock solid. To not be able to put them up because we don't have this piece would be painful.

Pic of the top track which is in two pieces (we are missing the short piece:
The Rail is about 35mm by 51mm approx.
http://forum.homeone.com.au/images/spacer.gifhttp://i811.photobucket.com/albums/z...8-11121039.jpg

The doors:

http://forum.homeone.com.au/images/spacer.gifhttp://i811.photobucket.com/albums/z...813_134756.jpg

The top guide:
http://forum.homeone.com.au/images/spacer.gifhttp://i811.photobucket.com/albums/z...813_134645.jpg

If anyone knows anyone who could make something like this or know where I might get something this please let me know.

Cheers,
Darragh and Tasha


Read and reply to the full thread at RenovateForum.com....