gday

Printable View

7th January 2013, 06:12 PM
pcqypcqy

gday

Hi all

After reading some good advice on this and other forum pages I've just bought a 6-18 Lucas Mill and set it up at my block near Stanthorpe.

Will be looking to fell my own trees with my Stihl 362 and cut, dry and then build a weekender, then a house, and some other farm buildings.

Cheers

Dave.
8th January 2013, 08:59 AM
crowie

G'Day, Welcome to a top forum Dave.
You'll find a heap of helpful & knowledgeable blokes & ladies on the forum and for most very willing to assist.
Make sure you show off your handiwork as everyone loves a photo, especially WIP photos with build notes.
Have a look in the section specifically on mills.
Enjoy the forum.
Enjoy your woodwork.
Cheers, crowie
8th January 2013, 11:08 PM
Christos

Welcome to the forum. Hoping you find this site useful or at least enjoyable.
9th January 2013, 03:33 AM
JJF

Welcome to a forum
10th January 2013, 08:59 PM
artme

G'day Dave and welcome to the rathouse!!:2tsup::2tsup::2tsup:

Nothing like a bit of ambition to get you going. You'll get plenty of advice here!!

Also check out the Renovate Forums.
10th January 2013, 09:11 PM
tdrumnut

welcome to the forum Dave, enjoy your stay

All times are GMT +11. The time now is 06:08 PM.

This website and its content is copyright of U-Beaut Enterprises.
Any redistribution or reproduction of part or all of the contents in any form is prohibited other than the following:

♦ you may print or download to a local hard disk extracts for your personal and non-commercial use only
♦ you may copy the content to individual third parties for their personal use, but only if you acknowledge
Woodwork Forums as the source of the material.

You may not, except with our express written permission, distribute or commercially exploit the content.
Nor may you transmit it or store it in any other website or other form of electronic retrieval system.