Warpage in French door

http://www.renovateforum.com/attachm...892.451426.jpghttp://www.renovateforum.com/attachm...920.888523.jpg


Hi,
I'll be tackling this French door shortly after I finish the adjoining room. Hopefully the pictures will show some warping of the bottom of this door, which makes it difficult to close.

I'll be stripping and repairing the doors and changing some of the hardware.

Is the anything I can do to address the warping. The door will close but requires significant effort and results in that little barrel bolt taking decent pressure to hold it closed.

The displacement is about 1cm over ~50cms the width of the door.

Jon
Attached Thumbnails http://www.renovateforum.com/attachm...892.451426.jpg http://www.renovateforum.com/attachm...920.888523.jpg



Read and reply to the full thread at RenovateForum.com....