Ridge cap scribe gap?

I recently had a new roof installed. How big should the gap between the scribed ridge cap and the metal sheet. The installers appear to have left a pretty big gap at random points all along the ridge cap.

See pic for an example, please note the roof is nearly flat about 3-4 degrees fall at most.

Overall I haven't been too impressed with there workmanship, over tightened screws, a couple of dents in the odd sheet, the list goes on.

SHould I be concerned with the gap in the ridge cap?

Thanks

Attached Thumbnails http://www.renovateforum.com/attachm...p-dscn4768.jpg



Read the full thread at RenovateForum.com...