What Laquer should I use

Printable View

22nd November 2010, 12:57 PM
Dannys

What Laquer should I use

Hi All,
Im putting new jarrah raised panel doors in my kitchen. Im looking to spray the doors with laquer like Mirotone or the like. Im after a satin finish which will withstand all the attacks a kitchen can throw at it. Can anyone advise on what products I can use to achieve the above criteria. Also what size spray nozzle I'll need to use for the spray gun. Thanks in advance.

Regards
Danny
23rd November 2010, 06:55 AM
Oddjob1

Mirotone

Hi Danny,

a good start would be Mirocat PC 3220 in a 30% gloss. Go to the Mirotone website, they have a very comprehensive site with all the Data sheet stuff and spraying techniques etc. You can even give them a call and they will help you out.

Regards...Oddjob1
23rd November 2010, 02:34 PM
Dannys

Hi Oddjob1,
Thanks for your help

Regards
Danny
24th November 2010, 12:41 AM
gooma

Hi Danny,

I`ve been using the Becker Acroma DM 307 for a couple of months now, it`s a great product and i highly recomend it.

I`m using a 2mm nozzle on a HVLP gun at about 25psi, depending on the temperature i mix the Laquer/thinners/hardner at 10/6/1.

Hope this helps,

cheers
Brad

All times are GMT +11. The time now is 01:11 PM.

This website and its content is copyright of U-Beaut Enterprises.
Any redistribution or reproduction of part or all of the contents in any form is prohibited other than the following:

♦ you may print or download to a local hard disk extracts for your personal and non-commercial use only
♦ you may copy the content to individual third parties for their personal use, but only if you acknowledge
Woodwork Forums as the source of the material.

You may not, except with our express written permission, distribute or commercially exploit the content.
Nor may you transmit it or store it in any other website or other form of electronic retrieval system.