Re-coating timber benchtop

Printable View

9th October 2010, 04:12 PM
BBench

Re-coating timber benchtop

Hello, About 12 years ago we installed a Country Form Kitchen (Sydney based Company no longer in business) that is made from recycled Oregon. The bench tops are in need of major restoration and unfortunately I don't know what Country Form used as their finish coatings. If anyone out there knows, or is aware of what they used, I would appreciate advice on how best to restore the bench top and refresh the doors,drawers etc. I'm aware that most likely I need to sand the bench top to a clean raw surface to take out any dents and scratches etc. Many thanks.
11th October 2010, 07:02 AM
wisno

You can refinish your old table without have to know the previous finish.
Wipe off your old finish with acetone, and sand your wood until your get smooth and even surface and you can start your new finishing process.

EDIT: Link removed by moderator.

Thanks

Good luck

All times are GMT +11. The time now is 02:16 AM.

This website and its content is copyright of U-Beaut Enterprises.
Any redistribution or reproduction of part or all of the contents in any form is prohibited other than the following:

♦ you may print or download to a local hard disk extracts for your personal and non-commercial use only
♦ you may copy the content to individual third parties for their personal use, but only if you acknowledge
Woodwork Forums as the source of the material.

You may not, except with our express written permission, distribute or commercially exploit the content.
Nor may you transmit it or store it in any other website or other form of electronic retrieval system.