Applying shellac

Printable View

25th October 2004, 11:07 AM
Shaty40

Applying shellac

When applying shellac (french polish), at what stage should you start rubbing with fine paper or steel wool between coats?
25th October 2004, 08:24 PM
Sturdee

When applying french polish I rub down with steel wool after every coat. I apply the first two with a brush and from then on with a rubber untill I am satisfied with the finish.

Then I lightly rub back with a brush and English whiting powder and apply a hard wax to get that antique shiny look.

Peter.

All times are GMT +11. The time now is 12:36 AM.

This website and its content is copyright of U-Beaut Enterprises.
Any redistribution or reproduction of part or all of the contents in any form is prohibited other than the following:

♦ you may print or download to a local hard disk extracts for your personal and non-commercial use only
♦ you may copy the content to individual third parties for their personal use, but only if you acknowledge
Woodwork Forums as the source of the material.

You may not, except with our express written permission, distribute or commercially exploit the content.
Nor may you transmit it or store it in any other website or other form of electronic retrieval system.