squeaking hyjoist hanger

Printable View

2nd May 2010, 09:40 PM
Reno RSS Feed

squeaking hyjoist hanger

Hi Guys,

I'm installing Hyjoists 200/45 and using the recommended facemount hangers from Pryda. Is it normal for the joist to squeak until the flooring is down? I've tried a tight fit joist, up against the bearer and also a loose fit around 3mm short of the bearer but still getting a squeak, probably between the hanger and the top of the joist.

Any tips?

Pulse

Read the full thread at RenovateForum.com...

All times are GMT +11. The time now is 03:40 AM.

This website and its content is copyright of U-Beaut Enterprises.
Any redistribution or reproduction of part or all of the contents in any form is prohibited other than the following:

♦ you may print or download to a local hard disk extracts for your personal and non-commercial use only
♦ you may copy the content to individual third parties for their personal use, but only if you acknowledge
Woodwork Forums as the source of the material.

You may not, except with our express written permission, distribute or commercially exploit the content.
Nor may you transmit it or store it in any other website or other form of electronic retrieval system.