Cheap Brad nailer required

Printable View

28th December 2009, 10:10 PM
Reno RSS Feed

Cheap Brad nailer required

Hi All,

I need to get about 180m of archs / skirtings done over the break and I think a brad nailer will be well worth it. Can anyone recommend where I can get a cheap unit that will shoot up to 50mm brads? I only really need 35mm if that makes a difference.

I have brand name coiler and framer but I'm happy to just have a cheapy nailer for this job. Hiring a brad nailer from Kennards costs $50 a day so buying on eis a given.

I see one at super cheap for $69 that is suspiciously similar to the one at Bunnings for $99 with different branding.

What are your suggestions?

cheers,

Read and reply to the full thread at RenovateForum.com....

All times are GMT +11. The time now is 12:39 AM.

NavTabs provided by vBNavTabs (Pro) - vBulletin Mods & Addons Copyright © 2025 DragonByte Technologies Ltd.

Copyright © U-Beaut Enterprises 1999 - 2016. All rights reserved.

This website and its content is copyright of U-Beaut Enterprises.
Any redistribution or reproduction of part or all of the contents in any form is prohibited other than the following:

♦ you may print or download to a local hard disk extracts for your personal and non-commercial use only
♦ you may copy the content to individual third parties for their personal use, but only if you acknowledge
Woodwork Forums as the source of the material.

You may not, except with our express written permission, distribute or commercially exploit the content.
Nor may you transmit it or store it in any other website or other form of electronic retrieval system.