Scandinavion oil

[Old Paul]

Hi
I was wondering if somebody could help to point me in the right direction? I have just made a small kitchen table and the son wanted it finished in scandinavion oil which I put the first coat on yesterday and am just about to do the second coat, I am wondering if I could apply u-beaut eee and then give it a coat of tradional wax. Am I on the right track?
Thanking you in advance.
Paul

[LGS]

Absolutely, Paul.
Have a look at the Sofa table I made. Its in woodwork pics. That was finished in Scandinavian oil, then EEE, then Trad Wax. You get a really nice finish.

Regards,

Rob

[Old Paul]

Rob
Thanks for the quick reply,if I can impose on you again how long do I leave the oil before I hit it with the EEE,I was thinking a couple of days
Thanks again
Paul

[RufflyRustic]

Stop! Wait!! Do NOT use EEE under the coat of oil!!!

EEE goes on after all the oil coats have been applied.

Good luck

Cheers
Wendy

[Old Paul]

sorry Wendy
I confused you, I have already put the two coats of oil on and I was asking how long before I can apply the EEE.
Thaks anyway
Paul

[LGS]

Hi Paul,

The table I mentioned had the EEE treatment 24 hours after finishing with oil.
One thing I would recommend highly is the use of a Swansdown Mop for buffing after the addition of the wax. The finish you will achieve will be visibly superior to that done using a lambswool buff.

Regards,

Rob

[Old Paul]

thanks Rob
I will do as you suggest.
regards
Paul

[RufflyRustic]

Whew!!!!! :)

[Dave-Ben]

LGS-
Do you use the Swansdown Mop on the EEE or the Trad Wax or both??

I am building a hard wood table looking to use either Organo oil then wax or just wax - yet to decide which way to go
Dave

[LGS]

Hi Dave,
Sorry for the delay.
You need only use the mop on the Trad wax. Just a soft cotton cloth will do for the EEE. Though there's no reason why you shouldn't use it I guess.

Paul, how did the table come up?

Regards,

Rob

[Old Paul]

Hi Rob
I have done the EEE and given it one coat of wax, I am now putting it together and then will give it another coat. I will post photos when it is finished.
Thanks for your help
Paul

[Dave-Ben]

Rob
Thanks for that, just thought i would check. I bought teh mop and wax at teh Sydneyshow - It will be teh first time i've used them after learning about them on the forum. Still a bit of work to do before i am upto finishing.

Again Thanks

Dave