"Cheap" and the Australian Ethos

[bitingmidge]

In another thread, SA (Bless him), who was probably nursing quite a large headache BEFORE he got hit with the red paint gun, suggested that my scrounging bits to repair my errr.... "economy model" compressor was "cheap".

In fact he actually said:
If you are to cheap to buy good tools you are too cheap to do the job right.

Which of course got me round to thinking that we are a nation built on repars of "baling wire and twine and she'll be right".

I think we owe it to the preservation of our national culture to fix things that aren't worth fixing, to scrounge when we can buy stuff for half the cost.

Why else would we have all those threads on converting battery drills to wired versions, or heaven forbid (sorry Apricot) using daggy old planes! :eek:

I did quote from my favourite philosopher on that thread, but I'll do it again, because I think she was right.

It costs a lot of money to look this cheap.

My old fella drummed into me that all I needed to get on, was never to go anywhere without a pocket knife, a shilling and a piece of string, and I never do.

Cheap? Or an Aussie way of life??

P
;)

[echnidna]

what was the deener for?

[Auld Bassoon]

Cheap? Or an Aussie way of life??

P
;)

Hi Mr Midge!

I don't think that it's "cheap" to apply one's skills and intellect to make, fix, or improve an item, be it a machine or a simple tool, or whatever.

I don't qualify as an Aussie as I've only been here for a little over a dozen years, but it is apparent to me that Aussies are appropriately well reknowned for their inventiveness and creativity in reaching a workable solution to a problem.

This represents a much better attitude, methinks, than just buying anew because something has gone awry. As to buying cheap, I would only comment that if one looks at the tools that appear from time to time on this BB, many buy what they can, and generally of the best that they can; the real test, however, is what is produced, and the quality of work illustrated here is often of the very best kind indeed.

Cheers!

[bitingmidge]

What was the deener for?
Dunno, I guess it would have bought a pie, a bus fare home AND a clean pair of undies.

I'm not cheap, but I still carry the same one, it's good for getting the battery out of my camera.

P
:D :D :D

[Ashore]

Midge
I suppose you could you still get a boy scout to mow the lawn , wash the car, or is bob a job too far in the past

As to being cheep , I have looked at a couple of US forums and they seem to take great delight into talking about the tools they have bought and how much they cost the more complex and expensive the better.
To me I stick to that old adage anyone can make good ingredience taste good but it takes a good cook to make everything taste good
And so be it with woodwork where skill with old, cheep tools produces a better result than having the most expensive tools.
but I still like my grifkins jig, oztool dowel guide, Makita.........................

[echnidna]

You see that on this forum too as some spend money on fancy tools that really only help a little bit doing some jobs.
And the ongoing chatter about Jet and Dewalt etc when you could get decent industrial machines at close to their price.

But each to their own.

That reminds me, some friends picked up a GMC dowller at Bunnies for $69 on a recent trip to Geelong. (theyre $169 in local home hardware and mitre 10)Should have it in a few days.
Now heres a power tool made by the oft maligned GMC company, From a practical viewponit its the only brand available in Oz.

I'll set it up and eventually get around to demonstrating just how valuable this tool could be to just about any non darkside woodie including commercial furniture manufacturers.

[Groggy]

Cheap? Or an Aussie way of life??I reckon that's an urban myth we like to perpetuate because we like to think it's true. My father was a farmer and jack-of-all-trades. I can tell you he could apply a temporary fix to anything, and never ceased to amaze me with what he could do with levers by himself (take an engine out of the car on a bush track).

Anyway, when he built something from scratch it stayed built. A dinner table was stronger than most workbenches and the houses he built were strong as fortresses. But today's men don't get the common dog nouse they used to and we've become the numpties that we used to laugh at the yanks for.

Living off your wits nowadays conjures up images of phishing schemes rather than a labourer who can turn his hand to just about anything.

Sour bugger aren't I!

[Bodgy]

Even from a quick perusal of the forums, I shouldn't take a towering intellect to realise that it's not about money.

Its about the satisfaction derived from getting a 'bargain' tool to perform as well as the ludicrous $Fe$tool$, and about fixing or improving a tool using one's own ingenuity.

People who derive satisfaction from spending more money than their neighbour/friend on an item amaze me. They are the true marketer's bunnies - Shane Warne's Daryll!

Get a deal, or fix a dud. This provokes that warm, glowing and runny feeling inside - somewhat akin to surepticiously urinating in someone else's swimming pool.

[bitingmidge]

somewhat akin to surepticiously urinating in someone else's swimming pool.

Or even sometimes from the end of the diving board!

:D :D :D
P

[Grunt]

Or even sometimes from the end of the diving board!

:D :D :D
P

Midge, remind me to decline next time you invite me to your pool party.

[savage]

Not tooting my own horn, but many of my mate's come to me for advise on how to fix something, or can I fix it for them.

As I have always had an interest in woodie stuff but only been recently able to "have a go",I am only a novice in this art.

I am what I call a "compulsive tinkerer", I don't care if the item is worth a lot of money or a few bucks, to fix it or improve it, it is in itself an achievement, for meanyway. I think it's sad we live in a "throw away" society, and it's harder and harder to fix something as they are made with "planed obsolesance" (spelling)in mind, so to be able to overcome this fact, in it's self is a feat of skill, that's my way of thinking and that's why my shed's full of s.h.i.t.!.....:D

[Driver]

Getting back to Midge's original point (is that a reverse hi-jack?:p ), I reckon Australia still holds the world championship in making-do.

When we first came to Oz - back in 1986 - one of the first things that I observed was the way that remoteness and frequent lack of "the right part" didn't do much more than slow progress for a brief interval. It never took very long for an alternative to be found, made, invented, tied-together-with-wire or whatever.

This was so different from my previous experience (in various parts of Europe, the US, the Middle East and S E Asia). In all those places, if "the right part" wasn't available, progress ceased while we waited for it to arrive. Here, some bright spark will always find a solution. Sure, he'll curse and blame all the bludgers who have put him in this &&&&& position but he'll still lash something together that, with ingenuity and frequently amazing skill, works really well. This mindset operates all the way from the traditional bush mechanic's skill with baling wire and string to quite technically sophisticated modern engineering outfits.

As an example: in my previous career we installed a major piece of plant that was made in Taiwan. It worked OK but not to the levels that we wanted and needed. So, over a period of about six months, we modified it. All the while running it as hard as we could to achieve ever-increasing productivity aspirations. Within 12 months of initial installation, we had it producing to levels 12% better than the design spec. Ten years later, by the time I left, we had it running 65% better than the original design spec and the Taiwanese were sending their people to our plant regularly to learn what we had done to their machinery.

If necessity is the mother of invention then the tyranny of distance is its Aussie step-mother.

Col

[Shedhand]

Most of our forebears came here with a copper pot (if they were lucky) and the ar.se out of their trousers. Most came from the lower classes in the old dart and were used to improvising. We've simply inherited that trait. We are known for our inventiveness and I agree with the Midge, necessity is the mother of invention. That's why we've never started a war...too busy inventin g things.:D:D:D
cheers

btw. there's too much cr*p in my shed too..I'm a hoarder AND a tinkerer.

[Daddles]

Ahh, I'm reminded of my dear old Dad and my sister's first car, a Morris Minor. Now the old Morry had a habit of breaking clutch linkages. Said linkage could be replaced with the Morris part or a quarter inch bolt with a bend in one end. Two things came out of this habit - my sister's ability to drive a manual without a clutch (instead of asking Dad to bail her out) and my father's collection of quarter inch bolts prebent to enable quick restoration of the clutch.

Needless to say, this wasn't the only case of bush surgery to keep that old car happy and reliable (in a Morris sort of way). It was interesting to note that when my sister sold that car to her cousin, the daughter of a bloke who lacked Dad's bushman's skills and hence preferred to use the 'right' part for the job, that same ultra-reliable Morry (in a Morris sort of way) soon became too unreliable and expensive to own and was scrapped:(

Many years later, that same old Morry was observed by myself, still painted in that horrid pale blue, immaculately restored in a Bay To Birdwood Classic.

Richard

[Shedhand]

Ahh, I'm reminded of my dear old Dad and my sister's first car, a Morris Minor. Now the old Morry had a habit of breaking clutch linkages. Said linkage could be replaced with the Morris part or a quarter inch bolt with a bend in one end. Two things came out of this habit - my sister's ability to drive a manual without a clutch (instead of asking Dad to bail her out) and my father's collection of quarter inch bolts prebent to enable quick restoration of the clutch.

Needless to say, this wasn't the only case of bush surgery to keep that old car happy and reliable (in a Morris sort of way). It was interesting to note that when my sister sold that car to her cousin, the daughter of a bloke who lacked Dad's bushman's skills and hence preferred to use the 'right' part for the job, that same ultra-reliable Morry (in a Morris sort of way) soon became too unreliable and expensive to own and was scrapped:(

Many years later, that same old Morry was observed by myself, still painted in that horrid pale blue, immaculately restored in a Bay To Birdwood Classic.

RichardI had a blue morry too. Sold to some guy who converted it to a little flat tray truck and painted it orange. That was 30 years ago and I still see it driving around the suburbs.:D

[Iain]

I had a little orange Morrie, twin SU's for a bit more grunt, only problem was hills as the fuel pump couldn't keep up with it.
My late MIL used to be very critical of me (that is after all a MIL role;) ) saying that after the war her husband put an extension on the house when another baby arrived.
Of course back then no permits were required, no red tape, no design regulations.
I'm sure I could extend my place for bugger all but the council simply won't allow me to do it without there percentage of what they deem a reasonable cost, resulting of course in projects not going ahead.

[bitingmidge]

Cars... my sister overcooked her ancient Fiat 650 once, and I have this enduring memory of the old man "machining" the head on a sheet of plate glass with the appropriate carborundum powder.

Nothing a few nights in front of the tele won't fix luv.

P
:D

[Farm boy]

i never got into tinkering and repairing stuff until i got married and the wifes on my back do this do that.:D
since buying our farm i have knocked up fences built chook runs and not afraid to have ago at anything including making a nice drop of red wine:eek:
this country has become a throw away society and it makes me sick to see stuff people throw out on collection days thank goodness there are still scroungers and hoarders around to collect this stuff and use it again
thank god the wife does not go down the back:rolleyes:
cheers
greg

[Shedhand]

thank god the wife does not go down the back:rolleyes:
cheers
greg:D:D:D:D:D:D

[Termite]

Greatest challenge to an Aussie........"That won't work".

Standard answer........."Wanna bet?" ;)

[echnidna]

Greatest challenge to an Aussie........"That won't work".

Standard answer........."Wanna bet?" ;)

Dunno bout the younger generation ever being multiskilled to that eaxtent as the eddication system seems to be ever insisting that yer incapable less'n yer qwalifried and the guvvymint seems to tink so too.

But doing the impossible can be lotsa fun:cool:

[E. maculata]

It's the old cultural difference thing, I understand it as self sufficiencyI believe the Kiwis' have it too. I cannot take that "Guy" (SA) seriously anymore once he stated how bad our health system is compared to ???? showed me he talks with tongue of ignorance;) . If you truly believed that you must spend motza $$ to create, why bother creating, just purchase from artisan, and boast to your clients (no friends with attitude like that) and work acquaintances how much it cost, then Blokes like us think quietly, "SUCKER" could knocked that up from a pair of 4be2s' in a few hours:rolleyes: .

[echnidna]

It's the old cultural difference thing, I understand it as self sufficiencyI believe the Kiwis' have it too. I cannot take that "Guy" (SA) seriously anymore once he stated how bad our health system is compared to ???? showed me he talks with tongue of ignorance;) . If you truly believed that you must spend motza $$ to create, why bother creating, just purchase from artisan, and boast to your clients (no friends with attitude like that) and work acquaintances how much it cost, then Blokes like us think quietly, "SUCKER" could knocked that up from a pair of 4be2s' in a few hours:rolleyes: .

That erstwhile seppo - Pt Barnum said
"theres a sucker born every minute, thank God some of them survive"

What would you like to order SA???
better still
how much money you got???????????

[Tonyz]

Over here farmers buy Silicone seal by the box ! It'll hold anything together or block any hole Ive seen it in tractor radiatores after 3 years use! "OK so what it still works dont it.'

[Driver]

Here's a good example.

I've just bought these auger bits (from Stu Minuskin and Hans Brunner). They need a bit of work but I reckon that - with Bob Smalser's excellent guidance from his recent thread on the sweep brace(http://www.woodworkforums.ubeaut.com.au/showthread.php?p=240529), I'll be able to tidy them up and have them cutting like good'uns in no time.

[Auld Bassoon]

Nice find Col!

Now all you need are some holes that need making...

Cheers!

[ozwinner]

Ive got bucket loads of holes, send me your hole size list and Ill send some to you.

Al :D

[Driver]

Ive got bucket loads of holes, send me your hole size list and Ill send some to you.

Al :D


Naah!

Get with the programme, Al! This thread is all about doing it yourself (or, as they say in Yorkshire: DIT - Do It Thissen!). I fully intend to produce my own personal holes. :D

[chrisb691]

Now I know what a hijack is!!!! :D :D :D :D :D :D :D :D :D :D :D :D :D

[zenwood]

We seem to have a reputation for inventiveness, but also for not developing inventions to commercial success.

[bitingmidge]

We seem to have a reputation for inventiveness, but also for not developing inventions to commercial success.
Well there was the Iced Vo-Vo.


P (and we do have about 230million people too few for raging commercial success too.....)

[zenwood]

Well, EXCEPT for the iced Vo-Vo:D:D:D

lol

[Schtoo]

Dunno bout the younger generation ever being multiskilled to that eaxtent as the eddication system seems to be ever insisting that yer incapable less'n yer qwalifried and the guvvymint seems to tink so too.

But doing the impossible can be lotsa fun:cool:


Please define 'the younger generation' for me.

I keep hearing it, and want to know if I am it or not. :)


Inventiveness? Who the heck do you think gets asked to fix stuff around here? 2 weeks ago, I got nearly 10 calls in 3 days about broken stuff, to the point that I sarted answering the phone with "What's broken now?".

I do notice that the mentality stems from exposure though. A few of the guys I know here came from homes where dad did more than just go to work, so they have a go at some things, even if what they try doesn't always work. Those who come from homes where dad went to work, came home and went to bed don't try anything they don't understand completely.

My grandpa was a 'general dogs body' I guess, stuck in a workshop, but could fix anything from engines, hydraulics, electrical, etc, etc, etc. Not just a bodge repair either. I definietly inhereted that, even if I missed out on some of the patience. :rolleyes:

I'd like to know that when I get planted, I at least had a shot at almost everything, and, if not an expert, at least competant.

Sure, I could just go and buy whatever, but I'm too cheap to pay for it up front (preferring to defer the cost over materials and tools!) and don't trust some half-trained monkey to do it for me either.

What was the word for this on site? Demarkation or something? :confused:

[Dion N]

There's a sense of quiet satisfaction in knowing you did it yourself (regardless of any money saved or not). Tinkering or pottering in the shed pulling apart a broken object (regardless of whether you have the tools or skills to repair it) is one of life's simple peasures. Even if you never fix it, you will have probably learnt how it works and , if it was some sort of mass produced low quality item, how YOU would redesign it to work better.

[Zed]

what an intersting topic midge!

I like getting the good gear, I also like to "Improve" it. I like to get cheap gear and give it a once over to make it as good as the good gear. I think this is universal not just aussie. I think its more to do with mechanical eptitude and nessessity rather than a measure of dinki-di-ness.

I love to go to bunnies with a bolt or something and "bit of job in progress" and mull over the solution with the various options available from the racks. I lay it out in front of me and fiddle for up to an hour... theres one bloke who works there comes up and asks me for advice and makes a point of discussing my project for the hell of it.... good bloke.... sometimes other shoppers ask me for advice as the teenage pubesents dont know jack and I suppose I look like I do in me greasy, dusty clothes and bits and pieces strewn about....:D

just today i fixed the aiconditioner with some telco 6wire and some packing tape... the aircon mechaninc wanted to charge me wife $200.... the @rsehole...

[AlexS]

just today i fixed the aiconditioner with some telco 6wire and some packing tape... the aircon mechaninc wanted to charge me wife $200.... the @rsehole...

Would you like to come & do mine?

PS Please BYO wire - or will hayband do?:D

[echnidna]

Please define 'the younger generation' for me.

I keep hearing it, and want to know if I am it or not. :)


Inventiveness? Who the heck do you think gets asked to fix stuff around here? 2 weeks ago, I got nearly 10 calls in 3 days about broken stuff, to the point that I sarted answering the phone with "What's broken now?".

I do notice that the mentality stems from exposure though. A few of the guys I know here came from homes where dad did more than just go to work, so they have a go at some things, even if what they try doesn't always work. Those who come from homes where dad went to work, came home and went to bed don't try anything they don't understand completely.

My grandpa was a 'general dogs body' I guess, stuck in a workshop, but could fix anything from engines, hydraulics, electrical, etc, etc, etc. Not just a bodge repair either. I definietly inhereted that, even if I missed out on some of the patience. :rolleyes:

I'd like to know that when I get planted, I at least had a shot at almost everything, and, if not an expert, at least competant.

Sure, I could just go and buy whatever, but I'm too cheap to pay for it up front (preferring to defer the cost over materials and tools!) and don't trust some half-trained monkey to do it for me either.

What was the word for this on site? Demarkation or something? :confused:

Schtoo,
You're obviously immune from the over eddication problem as you are makin the grey stuff twixt yer ears work to your advantage.
Have fun fixing and making things and doing the impossible!!:)

[havenoideaatall]

sometimes other shoppers ask me for advice as the teenage pubesents dont know jack and I suppose I look like I do in me greasy, dusty clothes and bits and pieces strewn about....:D


Do you tour other Bunnings by any chance? If so, I'll look you up.

[Bodgy]

Back from the dead!

What was it all about?

[ozwinner]

Maybe havenoideaatall likes arrousing dead things.

Al :eek: