OldMontanaPhart
27th January 2019, 10:00 AM
Hello all-new guy here based in Montana, USA.
Followed BobL here after learning much from him on another forum about such arcane things as sharpening and milling.
Have only milled ONCE about 25 yrs back [with my trusty 034-that explains why only once] but now that I'm well and truly retired plan to build a mill, rebuild that tired old 066, probably splurge on the Huztl 070 clone and give it a whirl before I'm forced to do it while using a cane and walker...
Hope it won't offend anyone if I start posting pictures of milling in 2 feet of snow :U
Followed BobL here after learning much from him on another forum about such arcane things as sharpening and milling.
Have only milled ONCE about 25 yrs back [with my trusty 034-that explains why only once] but now that I'm well and truly retired plan to build a mill, rebuild that tired old 066, probably splurge on the Huztl 070 clone and give it a whirl before I'm forced to do it while using a cane and walker...
Hope it won't offend anyone if I start posting pictures of milling in 2 feet of snow :U