macklin
3rd February 2005, 10:36 AM
Just moved into our new home and it has a kelvinator refrigerator room air conditioner.
On the hot days we have had in Melbourne (very few) I have used it. It is situated on the wall of the garage next to the house with direct access to the lounge room. However I noticed that a lot of water is dripping from the base at the rear of the unit. The instruction card we have suggests ( I quote)remove the plastic plug in the base of the unit remove any material which blocks the drain hole (unquote) I removed the plastic plate at the rear but it appeared to be clean, you cannot see much as it ia a small hole at the base. Is this normal due to evaporation, on the days it was on it was very hot.
Thank you
Jean Bloom
On the hot days we have had in Melbourne (very few) I have used it. It is situated on the wall of the garage next to the house with direct access to the lounge room. However I noticed that a lot of water is dripping from the base at the rear of the unit. The instruction card we have suggests ( I quote)remove the plastic plug in the base of the unit remove any material which blocks the drain hole (unquote) I removed the plastic plate at the rear but it appeared to be clean, you cannot see much as it ia a small hole at the base. Is this normal due to evaporation, on the days it was on it was very hot.
Thank you
Jean Bloom