PDA

View Full Version : Dead dvr















Kev Y.
26th February 2010, 10:06 AM
What a wonderful way to end the week!!!! :~ :~

Went to the workshop to spin up a quick pen and found the ELCB operated. Turned off everything that came off of the circuit then reset the switch.

At first I suspected the compressor as being the culprit so left it until last.

Switched on the radio, it worked
Switched on the grinder, it worked
Switched on the Lathe.......pops from the lathe and the safety switch operated :~ :( :no:

!@#E@*Y&(&TE$#!)(@#&_)(*(#)!@E)!@(&)#(&!@)(#&#$_

and that is the censored version

I am now awaiting a call from Jim Carol to find out who to send it to so it can be repaired.

RETIRED
26th February 2010, 11:51 AM
Bummer!!.

Kev Y.
26th February 2010, 01:03 PM
And NO.... I will not be in the market for a Stubby!!!!

TTIT
26th February 2010, 02:08 PM
My lips are sealed :C

rsser
26th February 2010, 02:28 PM
Brudda, you need to pull out every plug; switch is not enuff.

Assume this circuit is just for the shed? O/wise, devices with water around are prone to throwing the RCD, like washers and cordless kettles. (EDIT: do you have any water using or heating devices in the shed? eg. aquarium heater for home brew?

If no luck there ....

If it were me I'd pull the red plate off and vac out all dust; I'd chk the power toggle switch with a multi-meter with power lead removed 30 mins b4hand.

I'm afraid that the grapevine reports PCB failures but let's hope it doesn't get to that.

Good luck.

Kev Y.
26th February 2010, 05:42 PM
Done ALL of that and more ERN... the dead give-away was the smoke coming out of the control box.

Called Carbatec, and am going down on monday to see if I can get it repaired.

rsser
26th February 2010, 06:06 PM
erk, you didn't mention smoke :oo:

Calm
26th February 2010, 06:22 PM
i say nuffink:B:roll:

RETIRED
26th February 2010, 07:45 PM
i say nuffink:B:roll:Just as well.:D

Kev Y.
26th February 2010, 08:10 PM
i say nuffink:B:roll:


:bartmoon: :ranting2: :Q

Kev Y.
26th February 2010, 08:11 PM
I'm afraid that the grapevine reports PCB failures but let's hope it doesn't get to that.




Yep I am pretty POed.. after all it is only 10 year old!!!!

rsser
26th February 2010, 08:45 PM
If this had been in the OP
the dead give-away was the smoke coming out of the control box I wld've said nuffink as well.

Not happy Jan.

Jim Carroll
26th February 2010, 09:05 PM
You do realise kev that it is a cardinal sin to let the smoke out of anything electrical

munruben
26th February 2010, 09:29 PM
You do realise kev that it is a cardinal sin to let the smoke out of anything electricalI just turn the other way when I smell smoke.:D

Tim the Timber Turner
26th February 2010, 09:32 PM
i say nuffink:B:roll:

Nice shiney lathe David.

Looks like it was owned by a little old lady who only used it in Sundays.

Cheers:)

Tim