Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 1 of 1
-
1st April 2024, 02:20 PM #1Most Valued Member
- Join Date
- Aug 2015
- Posts
- 4,458
A job from 9 year's ago, Outboard every bolt snapped
This came up on my facebook from 9 year's ago i think it was one of the first tig job's i done, i used a Repco 140A arc welder converted to tig, No HF so was only scratch start and no anti stick on that machine
Attached Images
- FB_IMG_1711938436648.jpg (92.8 KB)
- FB_IMG_1711938469623.jpg (96.4 KB)
- FB_IMG_1711938459924.jpg (77.1 KB)
- FB_IMG_1711938451310.jpg (155.7 KB)
Read the full thread at metalworkforums.com...